ここから本文です
TWO:"But you were in the house," he said, "disguised as a Spanish woman----""It wants some time of two o'clock yet," he said. "My friend, Dr. Bruce, does not go to bed early, so I shall go round and look him up. We'll go into the other letters carefully when we have time, Prout, but for the present I should like to borrow this one if you have no objection. What do you say?"
Classification by type of system
1natural circulation external heating pipe type
2natural circulation calandria type
3forced circulation type
4falling-film type
5rising film type
6jacket type
7coil type
Classification by method of operation
1single effect evaporator system
2multiple effect evaporator system
3auto-vapor mechanical compression system
4auto-vapor ejector compression system
5multistage flash system

After taking into consideration of the physical and chemical property of solutions, the desired design conditions, and available utilities, we select the most suitable type of system by utilizing our years of experience and excellent results.
In addition, we can offer designs and manufacturing services that take into careful consideration compactness, energy-efficiency, and automatization.

THREE:"You shall see our friend presently," Balmayne went on. "Herr Maitrank--I mean the Countess's friend--made a late call here. I had occasion to go out after he had left and found him lying unconscious in the road. Whilst there it seemed he was robbed of certain valuables. He was so good as to suggest that it might have been here that he lost his gems--I mean his valuables."Balmayne groveled helplessly. There were tears in his eyes. The man could plot and intrigue, he could make the weapons for others, but he had no heart for them himself. He was an abject coward without feeling for anyone but himself. He would have left his nearest to starve or die without a prick of conscience, but he was nervous for himself. And he read his sentence in Lalage's eyes.

While standard calandria type evaporation systems are widely used as the typical concentration evaporator by the various food and chemical industries, we have delivered many of those systems as finishing concentration evaporators especially for sugar solutions and starch syrups.

THREE:"Ah well, you come from The Netherlands; tell me whether it is true that you have let the Germans through, allowing them to ravish us? Tell me whether this is true?"
  • Enables flexible operation with little influence from variations in load and raw solution concentrations because of an adequate amount of solution being held within the system. These systems are also suitable for batch type burning evaporators.
  • Concentrations can be controlled within product specifications by the cascade control using the concentrations of concentrated solution and the raw solution supply and also by the arithmetic control of raw solution concentrations, etc. (Result for sugar solutions: 75±0.2wt%)
  • High-viscosity solutions and solutions that may crystallize can also be utilized by installing a propeller in the evaporator as a forced circulation system.
THREE:

This is a process example of a device that continuously and simultaneously concentrates two types of waste liquid with a single high-efficiency steam compressor.

THREE:Prout was profuse. He was very anxious over those notes. He had certainly had the good fortune to take into custody one Ren Lalage, the brother to Leon Lalage, who had been murdered in the Corner House.
  • By evaporating the steam using a mechanical compressor and reusing it, almost no heating steam is alomost required except the time of start-up, so large energy savings can be expected.
  • By combining with a thin film falling heat exchanger that does not raise the boiling point due to the liquid depth, it is possible to utilize the temperature difference of the compressor at the maximum.
  • Since the residence time and heating time are short and the holding amount is small, starting and stopping can be performed in a short time.
  • It will prevent scale adhesion in the can that the evaporator is divided into two parts, and that the supply of the undiluted solution is alternately switched over a fixed period of time to perform heat concentration.